Penang Bridge Lane Closure: November 24–26
Penang Bridge to Have Nightly Lane Closures from November 24 to 26 for LED Advertising Gantry Installation
Motorists using the Penang Bridge should expect possible travel delays from November 24 to 26, 2026, due to temporary closures of the middle and right lanes in both directions for LED advertising gantry installation works. The works will take place nightly from 11pm to 5am the following morning at KM0.7 of the bridge.
PLUS Malaysia Berhad has announced that the temporary lane closures are necessary to allow the gantry structure installation to be carried out safely. During the affected hours, only one lane will remain open to traffic in each direction.
A stop-and-go traffic management system will also be implemented to regulate vehicle movements and ensure the safety of motorists and workers carrying out the installation.
Key Takeaways
- Dates: November 24 to 26, 2026.
- Time: 11pm to 5am the following morning.
- Location: KM0.7 of the Penang Bridge.
- Affected lanes: Middle and right lanes in both directions.
- Traffic management: A stop-and-go system will be implemented.
- Reason: Installation of an LED advertising board gantry structure.
Table of Contents
- Penang Bridge Lane Closure Schedule
- Affected Locations and Lanes
- Why Is the Penang Bridge Experiencing Lane Closures?
- How Does the Stop-and-Go Traffic System Work?
- PLUS Advises Penang Bridge Motorists
- Tips to Avoid Delays When Using the Penang Bridge
- Conclusion
- Frequently Asked Questions
Penang Bridge Lane Closure Schedule
According to PLUS, installation works for the LED advertising board gantry structure on the Penang Bridge will take place over three consecutive nights, from November 24 to November 26, 2026.
The temporary lane closures will be implemented at night to allow installation activities to be carried out more safely while minimising disruption to daytime traffic.
Here is the lane closure schedule motorists should be aware of:
| Details | Information |
|---|---|
| Start date | November 24, 2026 |
| End date | November 26, 2026 |
| Working hours | 11pm – 5am |
| Location | KM0.7, Penang Bridge |
| Affected directions | Both directions |
| Closed lanes | Middle and right lanes |
| Traffic management | Stop-and-go system |
Motorists should note that the works will continue until 5am each morning. Therefore, drivers using the bridge late at night or in the early morning may experience slower-than-usual journeys.
Affected Locations and Lanes
The temporary closures will take place at KM0.7 of the Penang Bridge, affecting the middle and right lanes in both directions.
This temporary traffic arrangement means only one lane will remain open for vehicles travelling in each direction through the work area.
The following road users should take note of the closures:
- Car drivers: Reduce speed and follow the designated open lane.
- Motorcyclists: Exercise additional caution when approaching the work area and slower-moving vehicles.
- Commercial vehicle drivers: Pay attention to traffic personnel and ensure vehicles remain within the permitted lane.
- Daily commuters: Allow for possible delays when planning late-night or early-morning journeys.
As the closures affect both directions of the Penang Bridge, motorists travelling towards the island or mainland should take additional precautions throughout the works.
Why Is the Penang Bridge Experiencing Lane Closures?
The temporary lane closures are required to facilitate the installation of a gantry structure for an LED advertising board on the Penang Bridge.
Gantry installation works require dedicated working space and traffic management arrangements to protect both workers and road users.
The gantry will provide a supporting structure for the LED advertising board, which can be used to display information or advertising content at the designated location.
PLUS has scheduled the works between 11pm and 5am to allow installation activities to be carried out during a period when traffic is generally expected to be lighter than during daytime peak hours.
However, motorists should still anticipate possible delays as only one lane will remain open in each direction throughout the works.
How Does the Stop-and-Go Traffic System Work?
In addition to the lane closures, PLUS will implement a stop-and-go traffic management system throughout the installation works.
This system allows vehicles to move in alternating intervals according to instructions from traffic personnel stationed near the work area.
In general, the stop-and-go arrangement is intended to:
- Control vehicle movements: Ensure traffic follows the designated sequence and direction.
- Reduce accident risks: Prevent vehicles from entering restricted work areas without permission.
- Provide working space: Maintain a controlled environment for installation personnel.
- Manage traffic flow: Regulate vehicles passing through the remaining open lane.
Motorists should be prepared to stop temporarily and wait for instructions before continuing their journeys.
Do not attempt to overtake other vehicles or enter closed lanes, as doing so could endanger yourself, other road users and workers at the site.
PLUS Advises Penang Bridge Motorists
PLUS advises all motorists to follow instructions from traffic personnel and observe temporary road signs installed throughout the work area.
Recommended precautions include:
- Follow traffic personnel's instructions when passing through the work zone.
- Observe all temporary road signs and traffic diversions.
- Reduce speed when approaching the lane closure area.
- Maintain a safe following distance from vehicles ahead.
- Plan journeys in advance to minimise possible delays.
PLUS also reminds motorists to allow for additional travel time when crossing the bridge throughout the installation period.
Motorists can also obtain the latest traffic updates through PLUS's official channels before starting their journeys.
Tips to Avoid Delays When Using the Penang Bridge
Although the lane closures are scheduled during nighttime hours, motorists travelling across the Penang Bridge between 11pm and 5am from November 24 to 26 should make the necessary preparations.
Here are some useful tips to help make your journey smoother:
- Check traffic conditions before leaving: Get the latest updates through official PLUS channels to understand traffic conditions on the bridge.
- Allow additional travel time: Set aside extra time in case of congestion or delays caused by the stop-and-go traffic arrangement.
- Avoid sudden lane changes: Move into the permitted lane early and follow temporary road signs.
- Maintain a safe following distance: Leave sufficient space between your vehicle and the one ahead, especially when traffic is moving slowly.
- Exercise caution when driving at night: Ensure your vehicle lights are working properly and remain alert to workers moving around the construction area.
- Follow traffic personnel's instructions: Stop when instructed and do not enter restricted areas.
Expert Tip for Penang Bridge Motorists
If you need to use the bridge between 11pm and 5am from November 24 to 26, check traffic conditions before departing and allow additional travel time. This will help reduce stress if delays occur due to the stop-and-go traffic arrangement.
Common Mistake to Avoid
Do not attempt to overtake queues or use closed lanes to save time. Such actions could cause accidents and disrupt the installation works.
Conclusion: Plan Your Journey Before Using the Penang Bridge
The temporary closure of the middle and right lanes on the Penang Bridge from November 24 to 26, 2026, is something all motorists should take note of, particularly those travelling at night.
The installation of the LED advertising board gantry structure at KM0.7 will take place between 11pm and 5am the following morning, with only one lane remaining open to traffic in each direction.
The implementation of the stop-and-go traffic management system also means motorists may experience delays when passing through the work area.
Therefore, drivers are advised to plan their journeys in advance, follow instructions from traffic personnel and temporary road signs, and prioritise safety throughout their journeys.
Remember, arriving safely is more important than reaching your destination a few minutes earlier.
Planning to sell your car? Motorist Malaysia can help you explore car-selling options and connect with potential buyers.
Frequently Asked Questions (FAQs)
1. When will the Penang Bridge lane closures take place?
The lane closures are scheduled from November 24 to 26, 2026, over three consecutive nights.
2. What time will the Penang Bridge lane closures take place?
The lane closures and traffic management works will take place from 11pm to 5am the following morning.
3. Where is the lane closure location on the Penang Bridge?
The closures will take place at KM0.7 of the Penang Bridge, affecting both directions of travel.
4. Which lanes will be closed on the Penang Bridge?
The temporary closures will affect the middle and right lanes in both directions, leaving only one lane open to traffic for each direction.
5. Why are the Penang Bridge lanes being closed?
The closures are necessary to facilitate the installation of a gantry structure for an LED advertising board on the Penang Bridge.
6. What does the stop-and-go traffic system mean?
A stop-and-go system is a traffic management method that allows vehicles to move in alternating intervals under the direction of traffic personnel. Motorists may need to stop temporarily before being allowed to continue.
7. Are both directions of the Penang Bridge affected?
Yes. The lane closures at KM0.7 will affect both directions, including traffic travelling towards Penang Island and the mainland.
8. Will the Penang Bridge be completely closed from November 24 to 26?
No. Only the middle and right lanes will be closed. One lane will remain open to traffic in each direction throughout the works.
9. Will motorists experience traffic congestion?
Motorists may experience delays because only one lane will remain open in each direction and a stop-and-go traffic management system will be implemented.
10. What is PLUS advising Penang Bridge motorists to do?
PLUS advises motorists to follow traffic personnel's instructions and temporary road signs, plan their journeys in advance and drive carefully.
11. How can I check Penang Bridge traffic conditions?
Motorists can check traffic updates through PLUS's official channels before starting their journeys to obtain the latest information about highway conditions.
12. Will the lane closures take place throughout the day?
No. The lane closures and traffic management arrangements are scheduled from 11pm to 5am the following morning from November 24 to 26, 2026.
Read More: KL road closures this Sunday for PDRM Fun Run
I want to find the highest selling price for my car within 24 hours!
Download the Motorist App now. Designed by drivers for drivers, this all-in-one app lets you receive the latest traffic updates, access live traffic cameras, and manage vehicle-related matters.